Training Kit – EEE, ETE, CSE
Hotline +8801916546181
Industrial Sensor Operation Trainer Board. model: SENV7.2
Technical Specification:
Mechanical Size (16”x14”x6”)
Supply Voltage: 220VAC/24VDC
Training feathers and Parameter:
1. Proximity Sensor Operation
(NPN,PNP,NO,NC)
2. Inductive Sensor
3. Photo Electric Sensor
4. Capacitive Sensor
5. Optical Sensor
6. Temperature Sensor
7. Ultrasonic Sensor (Optional)
8. Supplied with connecting cables
and User Manual
Hotline +8801916546181
Digital Logic Trainer Kit, Model:DLTV2.1
Technical Specification:
Mechanical Size (12”X10”X6”) Wooden body
Operating Voltage 220VAC/5VDC
Training feathers and Parameter:
1) Included on board dc power supply -12v,9v,5v
2) Included on board Digital voltmeter
3) Logic gate operation (AND, OR, NOT,NOR,NAND,EX-OR,EX-NOR)
4) LED Digital Control
5) 999 Counter
6) Pulse generator
7) Half and Full Adder
8) JK F/F, JK Master-Slave F/F
9) Seven segment display
10) Included Buzzer, DIP Switch
Hotline +8801916546181
Microcontroller Trainer Kit Model: PAAV1.2
Technical Specification:
Operating Voltage 220VAC/5VDC
Mechanical Size (12”X10”X6”) Wooden body
Training feathers and Parameter:
1. Bases on PIC, AVR, Arduino uno microcontroller.
2. On Board USB interface for serial downloading and communications
3. On board ZIP Socket port for the user Design.
4. All ports available for use by the programmer
5. On Board Arduino ADC Chip
6. On Board Arduino DAC Chip
7. On Board 16*2 LCD & DOT Matrix Display
8. On Board seven segment Display
9. On Board 4 Pulled up Keys
10. On Board 4 Pulled Down Keys
11. On Board 8 LED Outputs
12. On Board Two Relays and Opto Isolated Inputs
13. On Board Stepper Motor Controller Driver
14. Built in Power Supply
15. Enclosed in a wooden Box
16. Supplied with connecting cables and
User Manual
Hotline +8801916546181
8086 Microprocessor Trainer Kit
Technical Specification:
➢ Microprocessor Training kit based on 8086 with the following specifications:
➢ Based on Intel’s 8086/8088 CPU @ 2.5/5 MHz.
➢ 8086 Processor can be replaced by 8088.
➢ 16K bytes of RAM available to the user(6264)
➢ 16K bytes of EPROM loaded with powerful monitor program 2764/27128.
➢ Memory expandable further to 384 K byte
➢ Memory mapping definable by the user.
➢ Battery Back up for RAM area (Optional).
➢ 48 I/O lines provided through 2 Nos. 8255.
➢ Three 16-bit Timers/Counters through 8253.
➢ RS-232C for CRT Terminal through 8251.
➢ Baud rate selection through DIP Switch.
➢ 28 Keys and eight seven segment displays.
➢ Resident monitor with two modes of operation: keyboard and serial mode.
➢ All address, data and control signals available at FRC connector
➢ Powerful software commands like Go, Examine/Modify bytes/Register, Single stepping; Block
Move, Fill, Insert, Delete, Input/output bytes & word.
➢ Uploading /Down loading facility with PC.
➢ Assembler/ Dissembler With Built in Power Supply.
Leave a reply