Download & Install OMRON HMI -NB-Designer_V1.501 Software
Download the OMRON-NB-Designer_V1501 from
System Requirements
Before using OMRON-NB-Designer_V1501, users have to make sure that an operating system meets the requirements below.
Operating system: Windows 7 / 8 / 10
CPU: Pentium 1.5 G or above
Memory: 1024 MB or above (A memory with a capacity of 2048 MB or above is
recommended.)
Hard disk drive Capacity: 5000 MB or above
Download the OMRON-NB-Designer_V1501 from
NB-Designer also supports the bitmap data directly calling the pictures from the external memory in
order to save the memory space of the HMI. The function of accessing pictures from the external
memory is only applicable to the HMI with USB HOST (NB
For example:
Create a background picture named “background.bmp” and save it in the root directory of USB disk
(Here refers to USB1). Then the project will directly call the picture named “background.bmp” from USB
Models which are supported
List of Models
NB Unit
Models
NB3Q-TW00B
NB3Q-TW01B
NB5Q-TW00B
NB5Q-TW01B
NB7W-TW00B
NB7W-TW01B
NB10W-TW01B
Serial Communication Unit
CS1W-SCU21
CS1W-SCU31
CJ1W-SCU21
CJ1W-SCU31
CJ1W-SCU41
Ethernet Communication Unit
Models
CS1W-ETN21
CS1W-EIP21
CJ1W-ETN21
CJ1W-EIP21
CJ1W-CIF41
A-2
Resolution
QVGA 320✕ 240
3.5 inches
QVGA 320✕ 240
3.5 inches
QVGA 320✕ 234
5.6 inches
QVGA 320✕ 234
5.6 inches
WVGA 800✕ 480
7 inches
WVGA 800✕ 480
7 inches
WVGA 800✕ 480
10.1 inches
Models
- RS-232C (2 ports)
- RS-422A/485 (2 ports)
- RS-232C (2 ports)
- RS-422A (2 ports)
- RS-232C (1 port)
- RS-422A (1 port)
- 100Base-TX, 10Base-T
- 100Base-TX, 10Base-T
- 100Base-TX, 10Base-T
- 100Base-TX, 10Base-T
- 100Base-TX, 10Base-T
NB-series Programmable Terminals NB-Designer Operation Manual(V106)
Size
Communication
COM1
COM1, Ethernet
COM1, COM2
COM1, COM2, Ethernet
COM1, COM2
COM1, COM2, Ethernet
COM1, COM2, Ethernet
Specifications
Specifications
CS series CS1G/H, CS1G/H-H
CS series CS1G/H, CS1G/H-H
CJ1 series CJ1G/H-H, CJ1M
CJ1 series CJ1G/H-H, CJ1M
CP1H, CP1L, CP1E
USB
(Equivalent of USB 2.0
Full Speed)
Slave
Host, Slave
Slave
Host, Slave
Slave
Host, Slave
Host, Slav
click ok button
open OMRON-NB-Designer_V1501
click Next
click to Next
check Next
click Install
Setup OMRON-NB-Designer_V1501
press Finish button
press NB-Designer
As seen above, The OMRON-NB-Designer_V1501software is running and working properly.
Download the OMRON-NB-Designer_V1501
Leave a reply