System Requirements
Before using MITSUBISHI HMI SOFT , users have to make sure that an operating system meets the requirements below.
Operating system: Windows 7 / 8 / 10 ( 64 bit )
CPU: Pentium 1.5 G or above
Memory: 1024 MB or above (A memory with a capacity of 2048 MB or above is
recommended.)
Hard disk drive Capacity: 5000 MB or above
Download The MITSUBISHI_HMI_SOFT_E-Designer7.52
The operator panel is designed for stationary installation on a plane surface, where
the following conditions are fulfilled:
- no high explosive risks
- no strong magnetic fields
- no direct sunlight
- no large, sudden temperature changes
– Install the product according to the accompanying installation instructions.
– Ground the product according to the accompanying installation instructions.
– Only qualified personnel may install the operator panel.
– Separate the high voltage, signal and supply cables.
– Make sure that the voltage and polarity of the power source is correct before
connecting the product to the power outlet.
– Peripheral equipment must be appropriate for the application and location.
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/11-7-1024x653.png)
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/1-8.png)
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/2-7-899x1024.png)
Click Extract Files
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/3-7-1024x604.png)
Click OK
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/4-7.png)
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/5-7.png)
Click Next
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/6-7.png)
Click Next
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/7-7.png)
Click Next
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/9-7-1024x455.png)
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/10-7-1024x755.png)
Click Finish
![](https://www.motiveautomation.com/wp-content/uploads/2022/12/11-7-1024x653.png)
Leave a reply