Download And Install HMI Software Weintek EASY BUILDER PRO 6.03.02
system requirement
Operating System, Windows 7 SP1 (32bit / 64bit)
Windows 8 (32bit / 64bit)
Windows 8.1 (32bit / 64bit)
Windows 10 (32bit / 64bit)
The I/O ports may vary between models
The I/O Ports include SD card slot Allows downloading / uploading project file, including recipe data, event log, data log and also allows recording history data and data backup.
COM Port: Connects PLC or other peripheral devices.
The type of serial port include: RS-232, RS-485 2W, RS-485 4W, and CAN Bus.
Ethernet: Allows downloading / uploading project file, including recipe data, event log, data log etc. Connects to Ethernet devices, such as PLC, laptop.
USB Host: Supports USB devices, such as mouse, keyboard, USB disk, printer, or barcode device.
USB Client: Allows downloading / uploading project file, including recipe data, event log, data log etc and also allows recording history data and data backup.
For the first time operating HMI. project files designed using Easy Builder Pro can be used on HMI.
Supports access to CMT Series HMI via network, for operating CMT Series HMI on PC.
Easy Access Supports access to remote HMI by connecting Easy Access server over Internet.
click Extract files
click ok button
open Easy Builder Pro
click
click and open
press setup exe
click ok
click next button
first choose I accept than press next button
click next
click Install
press Finish
open software
click Easy Builder Pro
As seen above, The WEINVIEW Easy Builder8000 Pro software is running and working properly.
Download the EB Pro from
Leave a reply